Product Name: | High Speed Hat Roll Forming Machine | Shaft Diameter: | ¢75mm, Minimum Is ¢60mm |
---|---|---|---|
Steel Thickness: | 0.9-1.5mm | Station: | About 15 Stations + One Station For Rectify |
Mian Power: | 18.5kw | Speed: | About 40-50m/min Without Punching System |
Punching System: | 2 Units | ||
High Light: | roll forming equipment,roll forming machine |
40-50m/min Hat Roll Forming Machine About 15 stations Wire-electrode cutting
1. Main speficication:
1 |
Suitable Material | Galvanized (345MPa)/Galvalume (550MPa) |
2 |
Width of the raw material | Base on profile |
3 | Thickness | 0.9-1.5mm |
A: 40-150 adjustable
B: 40-80 adjustable
Machine adopts hydraulic punching system, detailed punching drawing need to provide by customer.
2. The Chart of Process Flow
5T hydraulic Un-coiler—Feeding& Flatten—servo feeding& Punching—Roll Forming—Rectify—Track Cutting—Stacker
3. Specification of Components
Technical Specification & Remark | |
5T hydraulic decoiler
|
|
Leveling part
|
|
Servo feeding& punching machine
|
|
Feeding of forming
|
|
Main Roll Forming Machine
|
|
Machine structure:
|
|
Hydraulic cutting system
|
|
Stacker
|
|
4. After Service
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of the machine, we will repair it for free in one
year.
5. Installation and training
a. If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
b. Without visiting, we will send you user manual and video to teach you to install and operate.
C. If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.